4.1.1.
Stations
Before performing any kind of measurement in GART-2000®
CE a station has to be
defined. A basic principle of GART-2000®
CE is the attachment of
measurements to a station. For GPS the location of the Base receiver is a
station. The station-concept enables the user to apply different transformations
in one project and therefore is the key to the integration of total stations and
GPS in GART-2000®
CE.
Use
the menu Input
> Stations to setup a station. After the first Initialisation of the
station in a new project GART-2000®
CE uses this station
automatically.
The function displays a list of all available stations in the project. Enter the name of a new station in the field <Station
number> or choose an already existing station by double-clicking in the
list. If you enter a new GPS station make sure to activate the <GPS>
checkbox.
If a new station is created additional data may be entered:
-
Code,
MA: point code and marker type
-
Instr.Height:
antenna height
-
PP:
if the station
is to be used as a control point this checkbox has to be activated.
-
System:
to work with
different systems during a project choose the actual system for this station.
All coordinates of measurements that relate to this station are stored in this
system.
-
Instrument:
choose Total Station
Location, Observer and
Weather are additional information, which are useful for the documentation of a
project.
With
the <OK> button the station is
stored.
GART-2000®
CE
automatically changes into the menu Input
> Stations,
after first Initialisation of the receiver in a new project or after the first Initialisation
of the base.