4.2.4.
Coordinates
With the menu Output > Coordinates all
coordinates of the actual system are listed.
The window contains all coordinates of a project in the chosen system. A click
on a point in the graphic screen marks the actual coordinate in the list.
The coordinate information includes point number, point code, marker type, east,
north, position precision, height, height precision, station information and
comments.
With <Print> the measurements
can be inserted into a file (see 4.5.7
Protocol). To delete a coordinate, mark
it and press the button <Delete>.
To search for a certain point press <Search>
and enter the point number. The list scrolls automatically to the individual
point.
To
edit points, i.e. to change point code, point number, coordinates, system,
precision or to enter a comment press <Edit>
or double click on the coordinate.
The fields have the following significance:
| PntNo. | Point number with up to 32 alphanumeric characters |
| Code | Point code |
| MA | Marker type |
| East | Easting in the user coordinate system [m] |
| North | Northing in the user coordinate system [m] |
| Height | Height in the user coordinate system [m] |
| AcP | Accuracy
of the position:
0 - No position D - Digitalized point M - Measured point R - Calculated point S - Control point |
| AcH | Accuracy
of the height:
0 - No height 1 - Level 1 (lowest level, e.g. total station) 2 - Level 2 (intermediate level) 3 - Level 3 (highest level, e.g. height control point) |
| Comment | Commentary to enhance documentation of the project |
The
coordinates can be entered either in plane or, using the button <Geo.>,
geographical mode. A conversion between user-coordinates and geographical mode
is done automatically when switching between the modes.
The Button <Geo.> switches from
plane coordinates to geographical coordinates.