4.3.2.4.
Control Measurements
If control measurements are to be made with a total station, this can be
performed from any particular station by measuring the starting point and the
end point of the line segment. The control measurement is then derived from the
bearings and distances.
The tachymetric measurement of control surveys is called up through the menu
function Calculate > Basic Tasks
> Control Measurement. The first measurement takes place towards the
starting point of the segment. By clicking the <Meas.> button, it
can be repeated as often as desired before the measured values are registered by
means of the <Save> button. For the 2nd measurement the end point
is collimated; this point is simultaneously the starting point of the second
control survey. If the first measuring point is collimated once again, a ring
and area calculation occurs automatically. The >> button activates
the control functions in the case of automatic tachymeters.
You can quit the
menu with <X>.